Contact Us Now: 855-498-4157 or KiwiSales@SolarWinds.com
Home > Products > Kiwi CatTools > What's New

What's New in Kiwi CatTools

The most recent release version notes will appear by default. If you would like to view an earlier product release please select that version from the dropdown list.

What's new in version 

Release notes for version 3.3.17

 - (Released on 03/03/2009)

Adds

  • Added Cisco.CallManager device script
  • Added Cisco.SCE device script
  • Added Alcatel.Switch.Omnistack device script
  • Added AlliedTelesis.Switch.8000 device script
  • Added Trapeze.Wireless.Lan device script
  • Added Report.Version table activity support to APC.AOS device script for Rack PDU and Smart UPS devices
  • Automatic daily flushing of the Kiwi DNS Resolver cache added to flush resolved hostnames within the Report.ARP table activity

Changes

  • Modified Cisco.Switch.IOS device script increasing the timeout to 2 minutes for "write mem" command
  • Modified Cisco.Switch.IOS device script to handle double authentication (e.g. SSH connection then local authentication)
  • Modified Cisco.Switch.IOS device script to exclude checking for "Error:" in output data if sending the "show log" command
  • Modified Cisco.Router.General device script increasing the timeout to 1.5 minutes for "clear counters" command
  • Modified Cisco.Router.General device script to handle double authentication (e.g. SSH connection then local authentication)
  • Modified Cisco.Other.CUE device script to remove VT100 Escape characters
  • Modified Cisco.Wireless.Lan device script adding "Username:" as a valid device prompt (for some Cisco Aironet devices)
  • Modified Aruba.ArubaOS.General device script adding CRLF & "Password:" as a valid device response when sending commands to set passwords
  • Modified Checkpoint.VPN device script adding "]#" as a valid device privilege prompt
  • Modified Dell.Switch.CLI device script adding checks for "(y/n)" as a valid device response when sending commands
  • Modified Dell.Switch.CLI device script to strip the More paging prompts once all the response data has been captured, instead of stripping them as they occur (resolves issue with SSH2 connections which may result in bits of missing data)
  • Modified Dell.Switch.CLI device script to recheck for device enable prompt if a command timeout occurs after handling a More paging prompt (may occur with SSH2 connections)
  • Modified Extreme.Switch.General device script to send a CR if no login prompt is received after the device banner text
  • Modified F5.BigIP device script adding check for "terminal type?" response message, then send "vt100" to set the terminal type (Dell BigIP devices)
  • Modified Fortinet.FortiOS.General device script adding checks for "(admin)#" as a valid device prompt
  • Modified Fortinet.FortiOS.General device script adding checks for "(console) #" as a valid device prompt
  • Modified HP.Switch.2500 device script to now send two CRs during login in an attempt to get the device prompt
  • Modified HP.Switch.2500 device script to handle TFTP transfer prompts
  • Modified HP.Switch.2500 device script adding a 1 second delay before attempting to check the buffer for the login prompt (resolves issue in HP where subsequent connections to device within short time period could result in the 'Password:' prompt flashing to screen, causing CatTools login failures.)
  • Modified HP.Switch.2500 device script to check for alternative config header line of 'Building configuration...' for Device.Backup.Running Config activity
  • Ignore text "Time Remaining =" and lines starting with "current time" added to IronPort.Security.General device script for Device.Backup.Running Config activity
  • Ignore text "opw" and "l4apw" added to Nortel.Application.Switch device script for Device.Backup.Running Config activity
  • "The service is unresponsive" message logging changed from an Error (level 1) to a Warning (level 2)

Fixes

  • Manager interface startup routine modified to prevent database connection issues and improve speed of loading the program interface
  • Fixed bug in Cisco.Router.General script where the "show tech" command output may be truncated if the device enable prompt appears within the data
  • Fixed bug in Cisco.Switch.IOS script where the "show tech" command output may be truncated if the device enable prompt appears within the data
  • Fixed Report.Compare.Running Startup activity where report/error e-mails were only sent if the "Attach reports to e-mail" option was selected
  • Fixed bug where error would occur if an import of devices via tab delimited file contained new groups
  • Added error trap to mailer code if trying to read past end of file
  • Fixed bug in Reports pane where German date formats with '.' separators cause data to load into the wrong columns
  • Fixed bug in CatTools configuration settings where POP Authentication setting for POP Port field would default back to port 110 whenever the interface reloads
  • Fixed "Error: 381" bug added in v3.3.16 release, which occurs when trying to add the first device into CatTools (effected Application installs only)

Release notes for version 3.4.0

 - (Released on 06/16/2009)

Adds

  • Added Startup configuration wizard for first-time users, to guide through the initial configuration of device, activities and CatTools general email notification settings
  • Added menu item to Options menu to call the new Device Wizard
  • Added menu item to Options menu to call the new Activity Wizard
  • Added Thwack search bar to top menu bar
  • Added DB.Backup.CatTools activity to schedule backup of the CatTools database
  • Added Device.Backup.TFTP activity to allow backup of devices which do not support the Device.Backup.Running Config activity (i.e. have no CLI command support to show the configuration to terminal window)
  • Added System.File.Delete activity to schedule deletion of files on the CatTools systems (e.g. to delete old configuration backup files)
  • 'Maximize pane' and 'Restore panes' right-click short menu items added to maximize current selected pane and then restore panes back to previous layout
  • Added 'Vendor' field to Device setup form to filter device types by vendor
  • Added 'SSH Username' and 'SSH Password' fields to Device setup form Passwords tab to facilitate log on to devices where the SSH and Local credentials differ

Changes

  • Additional prompt handling added to Aruba.ArubaOS.General device script
  • Report.Version table activity enhanced for Fortinet.FortiOS.General device script
  • Filename variable support added to Report.X-Ref.Port MAC ARP activity
  • Modified activity setup form E-mail tab to include override tick-box options allowing the enabling and disabling of the Alternative e-mail addresses
  • Modified device import from tab delimited file so Filename field is no longer mandatory within the import file
  • Removed option in CatTools Service installations to configure the state of the scheduler timer when the CatTools Manager interface is started
  • Timer is now always turned off when the Manager Interface is started (prevents intermittent service crashes issues)
  • Automatic CatTools database backups path changed to \KDB Backup\System Backups\
  • Replaced KiwiDiff component with GNU Diff for diff reporting

Fixes

  • Cisco.Router.General device script modified increasing timeout when performing TFTP transfers using the Device.CLI.Send commands activity
  • Extreme.Switch.General device script modified to add a delay when determining hostname, to ensure the device banner and hostname prompt has been received in full
  • HP.Switch device script modified to remove 'Running Configuration:' text from top of stored configuration so that it can be reloaded to device
  • Riverbed.Steelhead device script modified to strip out the intermittent multiple device hostname prompts from the end of device configuration captures which cause a 'config change' alert to be generated
  • 3COM.Switch.SSII device script modified to handle the '…is invalid' response message if an invalid unit number was specified when using connect via Session functionality
  • Fixed device count bug in import for Freeware version which allowed the import of one extra device
  • Fixed CatTools database rollback issue
  • Fixed variable initialization bug that can cause 'Invalid index' crash when manually comparing two files
  • Fixed Group field bug where a new group would be lost if the device type is changed
  • Syntax checking added to Email fields

Release notes for version 3.5.0

 - (Released on 05/03/2010)

Adds

  • Added Cisco.NXOS device script to support Cisco Nexus devices
  • Added Generic.Device script to provide basic login, config backup and send commands functionality to unsupported devices (when used with new Device Variations feature)
  • Added Device.Backup.TFTP activity to Fortinet.FortiOS.General device script
  • Connect via support to Allied Telesis scripts
  • Support for Windows 7 & Windows Server 2008 R2
  • Added 'Upgrade' menu item to navigate to NCM landing page
  • Pop-up reminder of 'days left in evalution' added to the Evaluation package
  • Device Variations feature added to CatTools core
  • SSH Username and SSH Password fields to CatTools API

Changes

  • SolarWinds rebranding

Fixes

  • Fixed intermittant service error bugs when logging in to devices using Cisco.Router.General and Cisco.Switch.IOS device types
  • Cisco.Firewall.ASA device script modified to improve handling of security context switching
  • Cisco.Other.CSS device script modified to fix missing serial number in Report.Version table activity
  • Cisco.Other.CUE script modified to fix serial number and software version issues in Report.Version table activity for Cisco AIM-CUE
  • Cisco.Switch.IOS script modified to fix missing serial number issue in Report.Version table activity for Wireless APs
  • HP.Switch device script modified to fix Report.ARP table and Report.Port info table parsing issues
  • Nortel.Switch.Ethernet device script modified to fix intermittant failure to send 'C' to enter CLI
  • Fixed bug where SSH Username and SSH Password fields are not populated when importing devices from CatTools 3.3.17 and prior
  • Fixed bug in ConnectVia logic where the AAA Username was being sent for SSH connections
  • Fixed bug where Stop Timer button required double-click to disable (Application version only)
  • Fixed bug with Error Counter and InfoLog syncronization
  • Fixed issue with 'Clear log window before starting each activity' option not working in CatTools Setup screen
  • Fixed issue with Activity log not being cleared (all activities would reappear on next activity run)

Release notes for version 3.6.0

 - (Released on 11/24/2010)

Adds

  • Device Variations user interface screens added to CatTools, accessible via a new 'Variations' tab on Device setup form on devices supporting variations
  • Device Variations extended to allow a variation file to be applied to multiple devices, based on device group and device type
  • New 'SSH Client' field added to options/setup screen (Misc tab) to provide support for manual SSH sessions to devices in CatTools
  • New collate diagnostics files screens added to simplify gathering of logs/device capture files when troubleshooting issues with CatTools Technical Support
  • %HostAddress% filename variable added
  • AlliedTelesis.AlliedWare.Plus device type added
  • APC.AOS.CLI device type added to support later devices now using CLI instead of Menu driven interface (e.g. AP9630 UPS - Network Management Card 2)
  • Enterasys.Wireless.Controller device type added
  • Lantronix.EDS device type added
  • NEC.Univerge.IX device type added
  • Device.Backup.TFTP activity added to Cisco.Wireless.LAN device type
  • Device.Backup.TFTP activity added to HP.Switch device type
  • Report.CDP Neighbors table activity added to HP.Switch device type
  • SSH1 and SSH2 methods added to APC.AOS device type
  • Device variations enabled for Cisco.ACE
  • Device variations enabled for Cisco.CallManager
  • Device variations enabled for Cisco.Firewall.ASA
  • Device variations enabled for Cisco.NXOS (Nexus)
  • Device variations enabled for Alcatel.Switch.OmniStack
  • Device variations enabled for AlliedTelesis.AlliedWare.Plus
  • Device variations enabled for APC.AOS
  • Device variations enabled for APC.AOS.CLI
  • Device variations enabled for Bluecoat.Cacheflow
  • Device variations enabled for Brocade.Switch
  • Device variations enabled for DLink.Switch.General
  • Device variations enabled for Enterasys.Wireless.Controller
  • Device variations enabled for F5.BigIP
  • Device variations enabled for Juniper.Router
  • Device variations enabled for Lantronix.EDS
  • Device variations enabled for NEC.Univerge.IX
  • Device variations enabled for Nortel.Switch.Ethernet
  • Search facility added to Online Help

Changes

  • 'Telnet' button on Device Information form changed to 'Telnet/SSH'. CatTools will start the relevant Telnet/SSH client for manual session to device based on device 'method' value
  • Right-click (on selected device) short menu 'Telnet to device' item changed to 'Telnet/SSH to device'. CatTools will start the relevant Telnet/SSH client for manual session to device based on device 'method' value
  • DB.UpdateDevice.Text field activity updated to support changing of device Group, Device Type, Connect Via and Method fields
  • Device.Backup.TFTP activity updated to support use of %ctDateISO and %ctTimeHHMM meta variables
  • Cisco.ACE now strips VT100 escape sequences from device output by default
  • Cisco.NXOS (Nexus) device type modified to issue 'terminal length 0' command to disable paging by default (this can be overridden with using Device Variations). This change prevents the Nulls appearing in device output and also appears to prevent the line wrapping issue after 80 characters
  • Cisco.Router.General device type updated to handle username and password prompts when transferring files via SCP using the Device.CLI.Send commands activity
  • Cisco.Switch.IOS device type updated to handle username and password prompts when transferring files via SCP using the Device.CLI.Send commands activity
  • Device.Backup.Running Config activity for Cisco.MDS.Fibre device updated to ignore lines beginning with "!Time"
  • Modified Device.CLI.Send commands activity for Cisco.WAE to support 'Run external script' feature
  • Modified Device.CLI.Send commands activity for Cisco.Wireless.LAN to support 'Run external script' feature
  • Device.Backup.Running Config activity for Bluecoat.Cacheflow device updated to handle paging prompts from Bluecoat ProxySG devices
  • Device.Backup.Running Config activity for Brocade.Switch device updated to ignore lines beginning with "date ="
  • Extended Report.Version table activity for Dell.Switch.CLI to support switch stacks
  • Modified Device.Backup.Running Config activity for F5.BigIP to support the sending of multiple commands (pipe delimited) via device variations
  • Device.Backup.Running Config activity for Juniper.Router device updated to ignore lines containing "script being generated on" (as per Juniper ERX device config output)

Fixes

  • Email addresses in General Options email settings now automatically cleaned up to remove trailing commas issue when trailing email address delimiters
  • Cisco.Switch.IOS device type updated to handle SSH1 connection issues to Cisco ASA's (retries connection attempt using the v -1 switch)
  • Fixed bug in Report.Error info table activity for Cisco.NXOS (Nexus) device type, where data was missing for a number of columns

Release notes for version 3.7.0

 - (Released on 03/20/2012)

Adds

  • Updated help documentation for System.File.Delete activity with new 'Troubleshooting' section
  • Updated help documentation for API with more CatTools client variables.
  • Updated Cisco.ACE device type with Report.ARP.table support

Changes

  • Freeware version device, client thread, and TFTP session limitations changed
  • Modified Brocade.Switch device script to disable paging (skip-page-display) to prevent backspace characters in captured data when CatTools tries to strip paging prompts
  • Modified Cisco.Firewall.ASA device script Device.Backup.Running Config activity to prevent removal of ‘FWSM Version’ line in later ASA O/S versions
  • Modified Cisco.MDS.Fibre device script Report.MAC address table activity to try new IOS version 'show mac address-table' command if 'show mac-address-table' command fails
  • Modified Cisco.Router.General device script Report.MAC address table activity to try new IOS version 'show mac address-table' command if 'show mac-address-table' command fails
  • Modified Cisco.Router.NoEnable device script Report.MAC address table activity to try new IOS version 'show mac address-table' command if 'show mac-address-table' command fails
  • Modified Cisco.Switch.IOS device script Report.MAC address table activity to try new IOS version 'show mac address-table' command if 'show mac-address-table' command fails
  • Modified Cisco.Switch.IOS device script Report.Port info table activity to handle hostname prompt appearing in 'show interface' command output when switches is in a VSS configuration.
  • Modified Cisco.Wireless.Lan device script Device.Backup.TFTP activity to increase timeout for the TFTP transfer command
  • Modified Enterasys device scripts login routine to only retry once if initial login fails as 3 failed login attempts can lockout the device
  • Modified Extreme.Switch.General device script login routine to handle random echoing of 'login:' prompt in device response causing CatTools to report a login failure
  • Modified F5.BigIP & F5.BigIP.GTM device scripts Report.Version table activity to include missing data including Uptime information
  • Modified Fortinet.FortiOS.General device script to ensure device has exited 'global' mode before sending the command to capture the device config
  • Modified Fortinet.FortiOS.General device script try 'ssh user@x.x.x.x' syntax if 'ssh -l admin x.x.x.x' syntax fails (fixes issue when doing connect via another Fortinet device)
  • Modified HP.Switch device script to handle the 'Do you want to log out [y/n]?' prompt before disconnecting the session (prevents errors being logged on some devices)
  • Modified IronPort.Security.General device script Device.Backup.Running config activity to handle change to the password masking prompt in response to the 'showconfig' command for O/S revision v7.5
  • Modified Linux.RedHat.Bash device script Connect Via code to check for 'password:' instead of 'password: ' which resolve issue connecting to Brocade device via Linux
  • Modified Netopia.DSL device script to improve hostname determination

Fixes

  • Fixed issue where config changes were not always being detected on Windows Server 2008R2 and Windows 7
  • Fixed bug where using %DateWDN% variable would use previous days weekday value
  • Fixed bug in variations feature where 'space' text in pre-login keystroke/post-login keystroke fields would not get converted
  • Fixed bug in variations feature 'Additional Command' tab where enabled variations with blank text fields (to override script defaults) were not being remembered
  • Fixed bug in activity import feature where activity name with a single quotation mark in its name causes error number: 3001
  • Fixed bug in Activity setup screen where double-clicking on a group header within device list box caused an application crash
  • Fixed bug where TFTP 'Bind to' field value in CatTools settings was not being used for TFTP transfers
  • Fixed bug in Device.Backup.TFTP activity where activity would reports "Backup via TFTP results: Failed" although TFTP file is successfully transferred
  • Fixed bug in Bluecoat.Cacheflow device script where --More-- prompt was not being stripped
  • Fixed bug in Cisco.NXOS (Nexus) device script where Username (login:) and Password (password:) prompts were not being excluded from prompt checks during login routine for an SSH connection
  • Fixed bug in Cisco.NXOS (Nexus) device script for Report.ARP table activity where MAC addresses were missing
  • Fixed bug in Cisco.NXOS (Nexus) device script for Report.MAC address table activity where data was not parsing correctly on some Nexus devices
  • Fixed bug in Cisco.NXOS (Nexus) device script for Report.Port info table activity where data was not parsing correctly on some Nexus devices
  • Fixed bug in Cisco.Router.General device script for Report.ARP table activity where a client script error "Type mismatch: 'UBound' on line: ..." occurred
  • Fixed bug in Cisco.Switch.IOS device script where a client script error "Invalid procedure call or argument 'Mid' on line ..." occurs on IOS-XE

Release notes for version 3.8.0

 - (Released on 10/23/2012)

Adds

  • Windows 8 support.
  • Windows Server 2012 support.
  • Support for F5 v11 (tmos).
  • Support for Palo Alto devices.
  • Support for SonicWall (SonicOS).
  • Support for RunExternalScript added to F5.BigIP and F5.BigIP.GTM.
  • Report.Version table activity added for HP switch.
  • Activities can now be applied to “All Devices” in the database. New option added to Devices tab of activity setup.

Changes

  • CatTools evaluation to last 14 days.
  • Update of WodSSH COM component to latest (2.9.6) to fix or improve SSH connectivity with some devices (e.g. Cisco ACS, Nexus, Extreme…).
  • DNS Resolver upgraded to improve resolution of IPs to hostnames. New DNS settings tab added to CatTools setup screens.

Fixes

  • Thwack integration and broken search.
  • Data parsing issue in Report.MAC.Address table activity for Cisco.NXOS (on Nexus 5000/7000).
  • Data parsing issue in Report.ARP table activity for Cisco.NXOS (on Nexus 5000/7000).
  • Data truncation issue in Device.Backup.Running Config activity for Cisco.Firewall.ASA.
  • Invalid command error in Device.Update.Banner activity for Cisco.Firewall.ASA.
  • Client script error: Variable undefined in Device.Update.Banner activity for Cisco.Firewall.ASA.
  • Login issue to Cisco.Wireless.LAN when connecting via Linux.RedHat.Bash.
  • Exclude null characters from the determined device hostname for Dell.Switch.CLI.
  • Missing Uptime data in Report.Version table activity for F5.BigIP and F5.BigIP.GTM.
  • Connection hanging problem when logging out of HP.Switch.
  • Improved data parsing in Report.ARP table activity for Juniper.Router.
  • Duplicated or missing data for Device.CLI.Send.commands activity on Nortel.Switch.Ethernet when capturing output to file.
  • Removal of bad characters from configuration file in Device.Backup.Running Config activity for Radware AppDirector.
  • Client Script error occurs while running Report.Version table activity for some Cisco IOS version.
  • Main script error occurs with corrupted rows in Report.X-Ref.Port MAC ARP activity.
  • SNMP timeout error in Report.SNMP.System Summary activity.
  • Group titles truncated in the CatTools setup tab in Windows 8 and Windows Server 2012.

Release notes for version 3.9.1

 - (Released on 03/12/2013)

Adds

  • Support for MikroTik devices.
  • Support for SolarWinds Licensing.
  • Added product maintenance renewal notifications.

Fixes

  • Fixed issue with backups on Fortinet.FortiOS.General devices.
  • Fixed CLI issue with Cisco WLC reload commands.
  • Fixed issue with Palo Alto scripts.
  • Fixed issue with connect through option on middle devices.
  • Fixed issue using enable password in Generic.Device.
  • Fixed issue with getting MAC reports from certain HP devices.
  • Fixed issue with backing up MRV switches.
  • Fixed issue when adding the "Ignore Text Field" using the Device Variations feature.

Release notes for version 3.10

 - (Released on 04/08/2014)

Adds

  • Variations added to the follwing device types: Cisco Router.General, Cisco.Switch.IOS.
  • Variations added to the follwing device types: Dell.Switch.CLI,HP.Switch.2500.,and Enterasys.SecureStack.
  • Monthly Scheduling options on Activites.
  • Support for Cisco Small Business devices.
  • Support for HP Devices 12000,12500,3500.
  • Support for Windows Server 2012 R2.
  • Newest SolarWinds licensing framework adopted.
  • New option to ignore a block of text from comparison during Device Running Config activity.

Fixes

  • Provision of handling paging prompts now added in Red Hat Linux Bash device types.
  • Fixed an issue with logging into Radware AppXcel.
  • New columns included in the Master Version Table Report of Extreme Switches.
  • Fixed an issue in ARP Table Reports and Palo Alto Devices.

EOL Statement

April 8, 2014: End-of-Life (EoL) announcement – Customers on Kiwi CatTools 3.7 or older should begin transitioning to CatTools 3.10.

July 8, 2014: End-of-Engineering (EoE) – Service Releases, bug fixes, workaround, and service packs for Kiwi CatTools 3.7 or older will no longer actively be supported by SolarWinds.

July 8, 2015: End-of-Life– SolarWinds will no longer provide technical support for Kiwi CatTools 3.7 or older.

Release notes for version 3.11

 - (Released on 05/24/2016)

New Features and Improvements:

  • IPv6 Support
  • SSL/TLS Email support
  • Variations for HP.Switch.2500, RedHat Linux, Checkpoint VPN & Huawei General
  • HP Procurve Software Updates
  • Include the variations files (or folder) in the tech-support zip
  • ARP Report Support for Checkpoint Firewalls

Fixed Issues:

  • Fixed the issue when backing up Fortigate over SSH.
  • Fixed the error when trying to run the Report.Error Info Table against Cisco NX-OS 6001.
  • %ctUM: EchoOff executed as command and not as %Meta Command issue has been fixed.
  • Fixed the version table command update for Sonic OS version 5.9 and later.
  • The issue with Dell PowerConnect switches connecting via SSH has been fixed.
  • The issue in flushing the buffer to connect Cisco Wireless Controller devices via SSH has been fixed.
  • The addition of 132 column to SSH2 and Telnet connection methods for F5 TMSH devices issue has been fixed.
  • Fixed an issue with handling direct password prompt on SSH login for Dell switch.
  • Fixed an issue with support stack data on Report version table for 3850 switches.
  • Fixed an issue when adding variations for Enterasys.MatrixN.Switch device type.
  • Fixed an issue when adding a provision to avoid config format in Palo Alto devices.
  • Fixed an issue when handling FTP prompts in checkpoint VPN.
  • Fixed an issue when adding ignore text provision for Enterasys MatrixN Switch.
  • Handling the echo issues for backup command in HP devices has been fixed.
  • Cisco.NXOS device script has been modified to read the non-numeric values in the Bytes conversion.
  • Cisco.NXOS device script has been modified to avoid the duplicate entry of interfaces.
  • Cisco.Switch.IOS device script has been modified to introduce an additional delay when determining the host name of the device and to avoid the error report email.
  • SSH connection option has been added in Foundry.Switch.General device type.
  • The column definition of a particular MAC Report format in Cisco.Switch.IOS script has been fixed.
  • Fixed the issue with Cisco.NXOS script where it displays non-numerical values in fields which requires numeric values.
  • Fixed the issue where checkpoint devices are adding additional backspace characters on paging prompts.
  • Fixed the issue with Nortel.Switch.Ethernet where misplaced Line Feed and Carriage Return (Lf & Cr) characters show instead of CrLf.
  • Connection via syntax for Telnet has been changed together with SSH in Fortigate devices.
  • Fixed the issue where Cisco Nexus 9000 switches are having different text/label for IOS information than earlier versions.
  • Fixed the issue with Cisco Nexus devices where the current system version gets overwritten by the older version in the report version table activity.
  • Fixed an issue with Cisco Stack Switch where details are not shown in the Version Report in the latest OS.
  • Fixed the issue where particular types of Cisco IOS Switches require a CR to be sent while connecting through another switch.
  • Fixed an issue with the latest version of Iron Port devices that have a menu selection to get to the CLI mode.
  • Cisco Firewall device script has been modified to avoid additional header information (serial number and hardware) in configuration.
  • The issue with new HP devices (latest OS) requiring confirmation upon entering enable mode has been modified.
  • The SonicWall Sonic OS command to get the version details has been changed together with the output format.
Only $787