To have the syslog messages received from your Linksys device displayed or logged in the raw format as shown in the example shown below, please follow these steps:

1. Open the SNMP inputs page (File | Setup | Inputs | SNMP)
   
2. Uncheck all the SNMP fields except "Message"
   
3. Set the field tagging to "No tagging"
   
4. Uncheck the option "Show OID of each variable binding"

Example Linksys message:

@in 192.168.1.10 80 192.168.1.20 3000

Please use the technical support form if you require further assistance.