Configuring a 3Com NetServer

Previous  Top  Next

To enable the sending of Syslog messages from a NetServer 8 or NetServer 16…

Connect to the NetServer via Telnet or Console cable
Use the Add Syslog command with the following syntax…

ADD SYSLOG <IP Address> LOGLEVEL <logging level>

The IP address is the address of the PC running Kiwi Syslog Daemon

The Logging level can be any one of the following

COMMON
CRITICAL
DEBUG
UNUSUAL
VERBOSE

For example…
ADD SYSLOG 10.0.10.23 LOGLEVEL VERBOSE

To confirm the Syslog entry has been added use the LIST SYSLOGS command to show the entries.

The output should be something like…

Console Prompt>LIST SYSLOGS
SYSLOG SINKS
SysLog Log Level Msg Count
192.168.203.203 COMMON 507
192.168.203.230 COMMON 4551

Remember to do a SAVE ALL command to store the new details to NVRAM.