www.netgear.org The syslog configuration is not available from the web interface and can only be done from the telnet command line interface or via the console port.
Menu 24.3.2 - System Maintenance - UNIX Syslog
Syslog:
Active= Yes
Syslog IP Address= xxx.xxx.xxx.xxx (IP address of the syslog)
Log Facility= Local 1 (Send messages with a facility of Local1)
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
Firewall log= Yes
VPN log= No
This setup is very similar to the Netgear/Zyxel RT311/RT314 devices