Thanks to David Masilotti for providing this information.
Using a web browser, connect to the management console.
On the left hand side, under the Advanced section, click on the Log Settings link.
Enter the IP address or host name of the machine running Kiwi Syslog Daemon into the Syslog Server field.
To enable the sending of different message types, tick the check boxes labelled: System, Debug, Blocked, Dropped and Attack as required. Try enabling all the message types to start with and then uncheck them if there is too much information being logged.
Press the Save button to apply the changes.
Now all new events logged on the system log will also be sent to the Kiwi Syslog Daemon server you have specified.