Configuring a ZyXEL ZyWALL 10
|Top Previous Next|
Thanks to Killian McCourt for this info.
The syslog configuration is not available from the web interface and can only be done from the telnet command line interface or via the console port.
Menu 24.3.2 - System Maintenance - UNIX Syslog
Syslog IP Address= xxx.xxx.xxx.xxx (IP address of the syslog)
Log Facility= Local 1 (Send messages with a facility of Local1)
Packet triggered= No
Filter log= No
PPP log= No
Firewall log= Yes
VPN log= No
This setup is very similar to the Netgear/Zyxel RT311/RT314 devices